category
logo
category

IKA 循環器 IC 基礎

Circulator IC basic
詢價商品請諮詢取得報價及交期
商品包含 1 種型號,請點選「立即選購規格」挑選

💡 重要通知:

因中東戰爭造成原物料波動影響,若訂單成立後進貨成本發生重大異動,我們將主動聯繫您協商處理。造成不便,敬請見諒。

登入即享專屬優惠價格
付款月結報帳 / 信用卡 / 銀行轉帳
運送宅配快速到貨,滿 NT$ 999 元即享免運!

選購型號

此商品所有型號都需詢價,請按「訂購諮詢」取得報價及交期
商品型號IABP-61494647
Circulator IC basic
原廠型號 IC basic
期貨16~30工作天
1unit

商品介紹

Feature

  • The throw-in thermostat IC basic is designed to be easy to install in a bathtub.
  • Can be heated up to 250°C by gently circulating in the bathtub.
  • With a powerful discharge and built-in suction pump, it is possible to heat and circulate the sample in the container or directly into the bathtub.
  • Can be connected to an external cooling water circulation device for adjusting the outside air temperature.
  • All IKA thermostats are UL marked and meet safety standards such as DIN12876.
  • The heating rate is fast and the temperature accuracy is ±0.02 K.
  • Temperature setting range; Room temperature to 250°C.
  • Uses an extendable inlet, so containers with different capacities can be installed.
  • Adjustable maximum safe temperature. Uses a powerful discharge and suction pump.
  • Adjustable maximum safe temperature.
  • Large, easy-to-read LED display: Pump speed, temperature.
  • Use the dial push buttons for intuitive operation. PT100 temperature sensor can be connected.
  • Warning messages can be checked by sound and text. Built-in USB/RS232 for control and recording via a computer (Requires software sold separately or can be updated with firmware).
  • M16 x 1 standard connection included.

Specifications

  • Appliance type: Immersion thermostat
  • Category of DIN 12876 compliance: III
  • Identification of DIN 12876 compliance: FL
  • Heating output: 2500W
  • Minimum work temperature: -20
  • Maximum working temperature: -200
  • Heating temperature range: Room temperature +10K at 1000rpm - 200
  • Temperature control: PT100
  • Temperature sensor: PT100
  • Safety temperature sensor: PT1000
  • Constant temperature holding: DIN 128760.02 +/- K
  • Mounting connector for temperature sensor: PT100
  • Display resolution: 0.1 +/-
  • Heating control accuracy: 0.1 +/- K
  • Minimum value of safety device: 0
  • Maximum value of safety device: 260
  • Pump shape: Suction pressure
  • Maximum pump pressure (discharge flow, 0 liter): 0.45bar
  • Pressure pump (suction side) (not working): 0.35bar
  • Maximum pump pressure (discharge flow, 1 liter): 26l/min
  • Pump connection: M16 x 1
  • Bath depth: 150mm
  • Clasp: Bridge
  • Free clamp (minimum): 260mm
  • Free clamp (maximum): 360mm
  • Technical data against standard value: DIN 12876
  • Continuous use time: 100
  • Body dimensions (W x H x D): 285 x 313 x 291mm
  • Weight: 8.5kg
  • DIN EN 60529 standard protection class: IP21
  • RS232 interface, USB interface: Included
  • Voltage: 230/100 - 115V
  • Frequency: 50/60Hz
  • Output: 2650W

Package size

  • Package size 500×450×650 mm 8 kg
以上圖片及相關資訊由 IKA 提供。
若有現場安裝、說明或特殊配送需求,歡迎事前與科研市集聯繫。部分商品因供應條件限制,可能無法提供相關服務,敬請見諒。

商品資訊

有任何商品上面的問題?
別擔心,讓科研市集來為你服務!
立即諮詢客服
最懂你的專屬採購模式
需要單位的最優價格及服務嗎? 我們的專業團隊能幫到你!
前往了解方案