NITTO KOHKI CO., LTD. 流量計 (用於水) 適用於黃銅 NBR Rc3/8 內螺紋安裝 FM-03BBRASSNBR

NITTO KOHKI Brass Water Flowmeter with Flow Control Valve, Rc3/8
NT$ 4,986NT$ 6,232
商品包含 1 種型號,請點選「立即選購規格」挑選

💡 重要通知:

因中東戰爭造成原物料波動影響,若訂單成立後進貨成本發生重大異動,我們將主動聯繫您協商處理。造成不便,敬請見諒。

登入即享專屬優惠價格
付款月結報帳 / 信用卡 / 銀行轉帳
運送宅配快速到貨,滿 NT$ 999 元即享免運!

選購型號

詳細規格與圖片請點選「商品型號」
商品型號ABP-69861542
Flow Meter (for Water) for Brass NBR Rc3/8 Female Screw Mounting
原廠型號 FM-03BBRASSNBR
滅菌無
諮詢/訂購後通知
1piece
NT$ 4,986NT$ 6,232
減少
增加

商品介紹

Features

  • The flow rate of cooling water can be checked numerically with a scale, and variation in cooling condition setting by operators is suppressed.
  • Although small, it has a built-in flow control valve, and molding conditions can be freely set for each machine.
  • Reproducibility of molding conditions and reduction of lead time.
  • As the screw part on one side can freely rotate left and right, it is easy to install and replace the body.
  • *Resin parts (scale tubes) cannot be replaced.

Specification

  • Mass (g): 190
  • Dimensions (L) (mm): (89)
  • Dimension (D) (mm): (33)
  • Dimensions (H1) (mm): Hex 23
  • Dimensions (H2) (mm): Hex 26
  • Dimension (T1) (mm): Rc 3/8
  • Dimensions (T2) (mm): Rc 3/8
  • Body Material: Brass
  • Outer Tube Material (Scale Tube): Polycarbonate (PC)
  • Mounting Screw Size: Rc 3/8
  • Maximum working pressure: 0.5 MPa{5kgf/cm2}
  • Withstand Pressure: 0.8 MPa{8kgf/cm2}
  • Flow Rate Range: 5~18 L/min
  • Seal Material: Nitrile Rubber (NBR)
  • Standard Material
  • Operating temperature range *: +10 to +60°C
  • ▼ *The available temperature range depends on the operating conditions.
  • Recommended maximum tightening torque: 11 N ? m{112kgf ? cm}

Videos

  • https://www.youtube.com/watch?v=TEm_xSd8JBc.jpg
以上圖片及相關資訊由 AS ONE 提供。
若有現場安裝、說明或特殊配送需求,歡迎事前與科研市集聯繫。部分商品因供應條件限制,可能無法提供相關服務,敬請見諒。
有任何商品上面的問題?
別擔心,讓科研市集來為你服務!
立即諮詢客服
最懂你的專屬採購模式
需要單位的最優價格及服務嗎? 我們的專業團隊能幫到你!
前往了解方案
購物車