USB direct data recording management is easy on a PC!
Because it is small and lightweight, it can be measured in narrow gaps.
Since this type is directly connected to the USB of the personal computer, there is no need for a data acquisition device such as a communication port.
The temperature and humidity can be detected on the LCD.
The upper limit (lower limit) can be set, and the LED will indicate when it is exceeded (temperature only).
When a computer is connected, the power is supplied from USB and the data is loaded directly into the computer, so it can also be used as a temperature and humidity recorder.
Specification
Measuring range (temperature/humidity): -20 to + 70 degrees C/5 ~ 90%%%% RH
Maximum recording capacity: 15000 points (temperature and humidity)
Measuring intervals: 2 to 59 seconds, 1 to 240 minutes
Battery: CR 1220 button battery (included for testing)
Size: 100.7 x 21.0 x 10.4 mm
Weight: About 20 g (excluding batteries)
< a href="https://axel.as-1.co.jp/images/pdf/pb/2-7963/rx-controller_v1.20.zip" rel="noopener nofollow" target="_blank" > Download the dedicated application (v 1.20) here < /a >
▼ Operating System: Windows ? 7/8/8.1/10 (32/64 bit)
Calibration points are 1 point each for temperature of 25 degrees Celsius and humidity of 50%%%%. If you would like additional points, please contact us separately.