Input: Thermocouple (*) K, J, T, S, R, E, B, N, W5Re/W26Re, etc.
Input: Temperature Measuring Resistor Pt100Ω, JPt100Ω
Communication port: Front loader port, rear RS-485
Alarm signal: relay contact of 250 VAC 3 A, 30 VDC 1 A
overcurrent protection: circuit breakers
Maximum load current: 10 A (ambient temperature 45°C or less)
Sampling time: 10 ms (0.01 seconds)
Dimensions: W200 x H150 x D280mm
*The default setting is K type. To use with other types, change the input type setting.
Refer to the supplied instruction manual before use.
[Precautions]
Place the camera in a cool, well-ventilated location, and avoid the following types of locations: Leakage or short circuit may cause fire, electric shock or malfunction.
▼ ? Dusty areas
▼ ? Blocking the controller's airflow
▼ ? Areas subject to moisture
▼ ? Near flammable chemicals such as alcohol and thinner
▼ ? Near the generation of noise
Be sure to turn off the power supply for wiring. Doing so creates the risk of fire, electric shock, and malfunction.
Do not use the product in an area that exceeds the rated voltage. Doing so creates the risk of fire, electric shock, and malfunction.
Connect the earth cable. There is a risk of electric shock.
When carrying the product, hold the handle on the top of the product.
Never disassemble or modify it. It is not covered by the warranty.