RS PRO 1956mm 合成橡膠液壓軟管組件，275bar 最大壓力 110-2019 110-2019

Feature

• Flexible hose assembly allows liquid transport at high pressure.　Pay special attention to the application, material, and product specifications.
• These assemblies are not suitable for use with our company high-pressure hydraulic cylinders and pump series with an operating pressure of 700 bar.　These assemblies are not eligible for our company's BS 5750 Part 2 stocklist for Assessment Capacity Level B registration.　Anti-puncture cover for air or gas applications exceeding 17 bar (250 psi).
• Straight Hydraulic Hose Assembly
• High-quality flexible hydraulic hose with crimping end attachment.　Each assembly includes an integrated end fixture (to prevent misalignment of inserts and sleeves) and a matching hose.　This hose is a synthetic rubber tube with a synthetic rubber outer cover and high tensile steel wire reinforcement.　The fittings are made of galvanized mild steel.
• Applications: Applications include petroleum-based hydraulic fluids, mineral oils, lubricants, water-glycol, water-oil emulsion hydraulic fluids, hot oil, grease, crude oil, fuel oil, air, and medium pressure water.

Specifications

• Overall Length:1956mm
• Inside Diameter:1/2in
• Connector A:Straight G 1/2 Female
• Connector B:Straight G 1/2 Female
• Inner Hose Material:Synthetic Rubber
• Reinforcing Material:Steel
• Cover Material:Synthetic Rubber
• Maximum Operating Pressure:275bar
• Connector B - Thread Standard:G
• Connector A - Angle:Straight
• Connector B - Thread Size:1/2in
• Connector A - Thread Standard:G
• Connector B - Gender:Female
• Minimum Operating Temperature:-40°C
• CODE No.:110-2019