NSK Ltd. Nippon Seiko High Precision Angular Bearingr Ball Bearing 7900A5TSULP4

Features

• Single row Angular Contact Ball Bearings have a contact angle and are suitable for radial and unidirectional axial or combined loads.
• Due to its structure, an axial component force is generated when a radial load is applied. Therefore, use two units facing each other or a combination of two or more units.
• Due to the difference in contact angle, Angular Contact Ball Bearings have different load conditions at the contact area between the ball and the inner and outer rings when the same load is applied, resulting in different elastic deformation and stress at the contact area.
• When an axial load is applied, the larger the contact angle, the smaller the rolling element load and the less the load on the contact area.
• When a radial load is applied, the smaller the contact angle, the smaller the rolling element load and the less the load on the contact area.

Specification

• NSK name number: 7900 A5TYNSULP4
• Type: Universal Combination (Single Unit)
• Nominal Number: 7900 A5
• Contact angle (°): 25
• Inside diameter d (mm): 10
• Outer Diameter D (mm): 22
• Width B (mm): 6
• r (mm) minimum: 0.3
• r1 (mm) minimum: 0.15
• Working point position a (mm): 6.7
• Basic load rating Cr (kN): 2.88
• Basic load rating C0r (kN): 1.45
• Allowable axial load (kN): 1.44
• Permitted speed (min-1) Grease lubrication: 62500
• Permitted speed (min-1) Oil lubrication: 93800
• Mass (kg) Reference: 0.009
• Cage Material: Synthetic Resin Cage
• Precision Grade: ISO 4
• preload: light preload