A throw-in heater for resin containers. (* When using a resin container, set the temperature to 50°C.)
Electronic temperature control with digital settings.
The maximum amount of water can be up to 20 L.
Specification
Rated power consumption: 100 VAC -900 W 50/60Hz
Size: Width 55 x Depth 62 x Height 484 mm
Temperature Range: 20~100°C (5°C increments) * Cooling function is not provided.
Body mass: Approx. 800 g (including power cord)
Equipped with excessive temperature rise prevention function and auto-off function (2 hours without operation)
Rated time: 2 hours
Heating Capacity: 30°C for 1 minute, 40°C for 6 minutes, 50°C for 13 minutes (In the case of starting heating at 10 L of water, initial water temperature of 25°C and room temperature of about 25°C)
Panel display during heating: Set temperature ⇔ actual measured temperature (alternate display every 5 seconds)
*The displayed water temperature is the temperature measured by the body sensor.
*Temperature difference may occur in the container depending on the room temperature and amount of water.