Memory meter ® SK-L751 ABP-1779312

Features

• A "temperature" data logger that can store up to 16,000 measurements.
• The memory interval of 1 second is approximately 4 hours, and the memory interval of 90 minutes is approximately 2 years and 9 months.
• How to calculate total storage time from storage interval and storage capacity: storage capacity x storage interval = total storage time # # Example: 16000 x 5 seconds =22.2 hours # You can choose from 14 storage intervals.
• ▼ * Data can be stored at various intervals: 1 second, 2 seconds, 5 seconds, 10 seconds, 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes and 90 minutes.
• Memory appointments are available.
• If you reserve (set) a date and time to start memory, memory will automatically start at the reserved date and time.
• A separate sensor, SK-L751-2, is included for measurement away from the body.
• -Up to two temperature sensors can be connected (Waterproof and Dustproof IP65 Compliant (* When indicator is connected), Cord 1.6 m). (It comes with one) You can choose from the following four storage methods according to your intended use.
• 1. One-time method: This method keeps storing data until the memory is full. Memory is automatically terminated when the number of stored data reaches 16000.
• 2. Endless method (Overwrite mode) When the memory is full, data is overwritten from the beginning. It is the best method for collecting data for the last fixed period.
• 3. Data number specification method: You can specify the number of data items to be stored in advance between 1~16000. It is the best method when you do not want to take unnecessary data.
• 4. Page system (Memory split mode): The memory can be divided into 4 parts (4 pages). Each device sequentially stores data from different locations and times, allowing multiple devices to be used with one device. 1 page can store 4000 data.
• Analysis software is included as standard * * Standard graph processing, real-time monitoring and other stored data can be fully utilized. It can also be saved in CSV format, so you can use commercially available spreadsheet software.
• Key-lock function prevents misoperation during memory.
• Upper and lower alarm values can be set (When the alarm is activated, the LED lights and the "Hi/Lo" mark on the LCD flashes.)
• Either battery or AC adapter (sold separately) can be used.
• The AC adapter has priority when used in combination. When the power supply from the AC adapter stops due to a power failure, etc., the battery automatically switches to the battery.
• The stored measurement data is stored in the internal memory even if the power is turned off.
• The stored measurement data can be downloaded to a PC or copied to a microSD memory card (sold separately). (It can be copied while it is being stored.)
• A six-digit ID number can be assigned to the device. If you use more than one unit, you can easily identify the equipment.
• - Analysis Software Features
• ▼★ Up to 10 indicators can be connected simultaneously using a USB hub.
• ▼★ Graph display, storage, printing and analysis according to usage (Expansion, reduction, period selection, integrated temperature analysis function, etc.).
• ▼★ Data can be analyzed with commercially available spreadsheet software when saved in CSV format.
• ▼★ real-time monitoring. During real-time monitoring, alarm settings can be set and alert emails can be sent to pre-registered email addresses.
• Compatible OS: Windows10/8.1/8 (all 64bit/32bit Japanese versions).
• Memory: 4GB or more (32bit)8GB or more (64bit) Hard disk: 4GB or more of free space required Other: USB port, CD-ROM drive required Internet connection and email address required to use mail alert function

Specification

• measurement range: -40.0 to 80.0 ° C
• resolution: 0.1 ° C
• Measurement accuracy: ± 0.7 ° C (0 to 40 ° C), ± 0.8 ° C (Other).
• Display capabilities:
• ▼Temperature alarm (ALM)
• ▼storage system
• ▼Status Display (REC/RES)
• ▼Memory (bar.)
• ▼SD Memory
• ▼low battery mark
• ▼key lock mark
• ▼each error message
• ▼Setting value display at each setting
• Number of measurement channels: Temperature 2 channels (Attached is waterproof dust-proof sensor SL-L 751 -2 x 1 piece)
• Storage capacity: Each channel 16000 data
• Memory interval: 1 sec., 2 sec., 5 sec., 10 sec., 15 sec., 30 sec., 1 min., 2 min., 5 min., 10 min., 15 min., 30 min., 60 min., 14/90 Street
• External memory: up to microSD, SDHC/32 GB.
• ▼※ Please use pre-formatted memory. The format supported by the tester is FAT 32 format. NTFS is not supported.
• dust control waterproofing: JIS C0920 IP 65 compliant
• ▼* However, when SK-L 751 -2 sensor is connected and battery is used (Not waterproof when using AC adapter)
• Body environment used Condition: -10 to 60 ° C 85% rh or less (No condensation)
• power supply : AA size alkaline battery 2 pieces or dedicated AC adapter (Options)
• battery Life : In Measurement Mode/Approximately 500 Hours , In Memory Mode/Each interval Can Store 16,000 Data (When LCD is off)
• ▼It is recommended to use the AC adapter when the LCD is always displayed or in measurement mode.
• Dimensions:
• ▼Body/(W) 114 x (H) 80 x (D) 35 mm (Excluding Projections)
• ▼Sensor Part/φ 3.3 x L 13 mm
• ▼Connector Part/φ 12 x L 40 mm
• ▼Cord/About 1.6 m
• ▼* The sensor cord can be extended up to 10 m (build-to-order products and other costs)
• material : Sensor/SUS304 , Connector/PVC Plastic , Cord/PVC Plastic
• Weight: Main Unit: about 232 g, Sensor: about 23 g
• Accessories:
• ▼Detachable sensor SK-L 751 -2 (Waterproof/dust-proof IP 65 Compliant/With test result report)
• ▼AA size type alkaline battery 2 pieces
• ▼Communication Cable (1.5 m) 1 piece
• ▼one instruction manual
• ▼One copy of Quick Manual
• ▼Analysis Software CD-ROM 1 piece
• Optional Product: No. 8229 -50 Dedicated AC Adapter (Cable 1.5 m)

Package size

• 225x190x100mm
• 0.48kg