Quickly adjust pressure and operating noise! Equipped with "Easy Pressure Adjustment" and "Silent Mode"
A middle model that pursues the "ease of use" required for commercial cleaning by ordinary households
Achieves water saving of about 83%! The amount of water used is approximately 1/6 (* This varies depending on the usage)
Reduce operating noise. Speed of motor can be quickly changed by lever operation. In addition, the quiet mode saves about 1L of water per minute!
Comes with a pressure adjustable "vario spray lance" as standard. Screen doors and outdoor air conditioners can be gently cleaned.
Quickly adjust from high pressure to low pressure without any step.
A variety of standard accessories can be used for various cleaning.
Cyclone jet nozzle (high pressure water can be jetted for powerful cleaning)
Trilligan (high pressure hose can be detached without tools)
Vario spray lance
Cleaning brush
Foam nozzle (The detergent is sprayed into bubbles, and the detergent stays in place and does not drip easily.)
Soft high pressure hose 10 m (Difficult to pick up and twist)
Smooth movement with handle and casters
Direct water connection & self-breathing function with self-breathing function (lift height 1m): Self-breathing hose set, pump performance improvement allows water to be sucked up without air release valve
Shimizu exclusive
Electric type
Folding type handle
Double insulation
Specifications
Current (A): 15
power supply (V): Single phase 100
Frequency (Hz): 50/60 sharing
Power Consumption: 1430
Normal discharge water (L/min): Standard: 6.0, silent: 5.0
Normal discharge pressure (Mpa): Standard: 8.0, silent: 5.0
Acceptable water temperature: 40 ° C or less
Maximum suction lifting height: 1.0 m
Powerful washing: tap water approx. 0.2 MPa → discharge pressure 8.0 MPa (Approx. 40 times the water consumption)
AIT library Dimensions (Length x Width x Height) (mm): 292 x 358 x 830
Mass (kg): 10.3
Code (m): 5
Standard accessories: trigger gun (high pressure hose Pref. 10 m), varios spray, cleaning brush, cyclone jet nozzle, foam nozzle, pressure hose 3m (water hose), water absorption connector, one touch joint (2 pieces), hose clamp, nozzle hole cleaning pin, self-priming hose set (With strainer and water absorption filter)