Dust concentrations outside and inside the mask are measured, respectively, and adherence to the face is quantified as the leakage rate (%).
Measuring the leakage rate of a mask using a test guide does not require drilling holes in the mask, so you can enter the site with the measured mask.
The communication software allows you to manage, view, and print the measurement results of each measurement mode, information about the person being measured, and mask information. The measurement results are also saved in CSV format, so they can be processed by commercially available spreadsheet software.
Specifications
Specifications: MT-05U
Size (mm): 210 x 240 x 232
Subjects to be measured: Evaluation of the adhesiveness between the mask and the face
measurement item: Particle count and leakage rate, protection factor, and fit factor
Eligible particle size: 0.3 μm or higher, 0.5 μm or higher, 0.3 to 0.5 μm
Mode: 4 Type (Daily Check Mode/Fit Test Mode/Fit Check Mode/Training Mode)
Measurement time: 10 seconds for outer and inner mask purge and 3 seconds for measurement in the (Fit Check Mode) standard (Total approximately 30 seconds)
power supply: AC100 to 240 V 50/60 Hz approx. 0.5 A