Cross movement holder for optical fiber machined with FC connector.
Use to collimate the light from the fiber.
You can choose from two types of screws: one for simple adjustment (FOP) and the other for fine adjustment (FOP-DM).
There are FOP-1 with only a cross motion adjustment mechanism and FOP-2 with a fiber tilt adjustment mechanism that can precisely adjust the center of the luminance distribution of the collimated beam.
The FC receptacle of the FC type optical fiber holder can be removed and replaced with a receptacle for SMA (FOP-ADP-SMA) or a fiber holder for plain fiber (MFH).
Cross-movement holders for SMA connectors (FOP-SMA) and for plain fiber (MFH) are also available.
A dummy FC connector is included at the time of delivery. This connector cannot be used for fiber optics.
* Since the tip of the FC connector is stopped at the butt of the receptacle, it is retracted 1.5 mm deeper than the end face.
* If you want to align the tip of the FC connector with the end face of the holder, use the ferrule adapter (FLAD).
* If the optical fiber is inserted or removed, the holder adjustment may move.
* When the optical fiber is reinserted, the adjustment mechanism of the holder needs to be adjusted again.
Specifications
[ common specification]
Main material: Aluminum
Surface treatment: Black anodic oxide
[Individual specification]
Adjustment range, up and down, left and right: ±1mm
Adjustment range, tilt, rotation: ±2°
Coarse resolution, up and down, left and right: 0.5mm/rotation
Fine resolution up and down, left and right: ?
Minimum scale reading, up and down, left and right: ?
Resolution, tilt, rotation: Approximately 0.7°/rotation