This objective lens positioner achieves both high performance and low cost through its unique positioning technology and processing technology cultivated through the production of stages, etc.
We propose a lens positioner that is ideal for production equipment and inspection equipment that require high throughput.
< Electric Revolver: LACR-4H>
This electric revolver has improved durability by making the positioning stop method of the objective lens non-click (non-contact).
A stepping motor is used as the driving method, and it is possible to operate with a resolution of μm or less at the tip of the objective lens.
By combining the 5 point teaching function (positioning adjustment in the direction of rotation) of the dedicated controller (GIP-101) and the centering adjustment mechanism of the main body, the center of the objective lens can be adjusted.
A separate connection adapter is required for installation in an observation unit with coaxial lighting.
< Lens switching slider: LACS-2H-A>
The number of objective lens switches is limited to 2, and the switching mechanism uses a sliding system.
Since it uses a sliding system, it has become compact and the switching time has been shortened for electric revolvers.
A separate connection adapter is required for installation in an observation unit with coaxial lighting.
Specifications
Objective lens switching number of pieces: 4 holes (90° x 4) (standard 1 place, Unidirectional core with an adjustment mechanism hole 3 places)
Movement amount: ∞ to clocks, counterclockwise direction
Motor: 5 phase stepping motor (0.75A/phase)
Instruction guide: Bearing system
Feed mechanism: Worm and worm wheel
Movement amount of 1 pulse: 0.01° (FULL)/0.0002° (50 division)
Table 1 rotation total pulse count: 36,000 pulse (FULL)
Repeat positioning accuracy: 0.02° or less
Switching repetition reproducibility: ±3μm or less (at the tip of objective lens)
Maximum transfer speed (switching): 60°/sec (A=>B, About 2.0 sec)