NIHON PISCO CO., LTD. 柔軟PU管清橘色 8 x 5 100 M UC0850-100-CO UC0850-100-CO

Feature

• Ideal for compact piping.
• You can also flush it.
• The cut mark useful for cutting tubes is displayed at intervals of about 500 mm.
• Use of insert ring is recommended. (If you need to ensure the drawing strength of JIS standard, use insert ring.). (JISB 8381-1))
• Make sure that the tube is not subjected to loads such as tension, torsion or extreme bending. This may cause the tube to collapse, burst, or fall out.
• The breaking pressure of the tube decreases with the increase of temperature, so please understand the working pressure well and check the safety factor with sufficient margin.
• Use the tube with a minimum bend radius.
• When attaching a tube to a one-touch joint, check whether the cut area of the tube is cut at a right angle, whether the outer diameter of the tube is scratched, and whether the tube is elliptical.

Specifications

• Outer Diameter (mm): 8
• Inner Diameter (mm): 5
• Minimum Bending Radius ( mm ) : 13
• Working Fluids: air, water (with conditions)
• Total length ( m ) : 100
• Tube Outer Diameter (φD) (mm): φ8
• Tube Inner Diameter (φD) (mm): φ5
• Minimum Mounting Radius (mm): 22
• tube colors: clear orange
• Total length ( m ) : 100
• Maximum Working Pressure: 0.6 MPa at 20 °C 65 %RH hours
• Working Vacuum Pressure: -100 kPa
• Operating Temperature Range: -15 to 60 °C (Without Freezing)
• Material/Finishing: TPU
• Country of origin: Japan
• Securities Code: 818 -2391

Package size

• Package size：465×465×100 mm 3.6 kg