ULVAC 薄膜式乾式真空泵 DAP 系列 Diaphragm Type Dry Vacuum Pump DAP Series DAP-15 和更多型號

膜片式真空泵可透過連接到進氣口來作為真空泵，並透過連接到排氣口來作為增壓泵。該泵無需使用油作為氣體接觸部分，是一種乾式真空泵。具有小型，輕量化，低價格及安全熱保護器等特點，具有簡單的結構與易於保養。可用於吸傳輸，吸定位，真空夾具，分析設備，物理化學設備，半導體檢測設備，裝置組裝，自動化機械和包裝機等方面。在重啟泵泵時，若泵內處於真空狀態則可能無法啟動。需將泵內壓力回復到大氣壓後方可重啟。若吸氣體含有水，灰塵，腐蝕性氣體等，需先將其去除。在低壓狀態下使用時，請使用0.15Mpa或以下的壓力。操作溫度範圍（℃）：7～40。頻率（Hz）：50/60。電壓（V）：100。電源：交流。噪音水平（分貝（A））（50/60Hz）：-。泵類型：乾式。乾式泵類型：膜片式。注意事項：本產品符合日本標準。有些產品可能不符合您的標準。下單前請仔細檢查規格。

The diaphragm type vacuum pump for both decompression and pressurization can be used as a vacuum pump by piping to the intake port and as a pressurization pump by piping to the exhaust port. A dry type vacuum pump that does not use oil for the gas contact part. Built-in small, lightweight, low-priced thermal protector for safety Simple structure and easy maintenance
Suction transfer, suction fixing, vacuum tweezers. Analytical equipment, physics and chemistry equipment. Semiconductor inspection equipment. Device assembly. Automatic machine, packaging machine
* When restarting after stopping the pump, it may not restart if the inside of the pump is in a vacuum state. If the inside of the pump is returned to atmospheric pressure, it will restart. If the inhaled gas contains water, dust, corrosive gas, etc., it is necessary to remove them. When using under pressure, please use at 0.15Mpa or less.
Operating Temperature Range (℃): 7～40
Frequency (Hz): 50/60
Voltage (V): 100
Power Supply: AC
Noise Level (dB (A)) (50/60Hz): -
Type of Pump: Dry
Type of Dry Pump: Diaphragm type
Caution

This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.