ICHINEN TASCO 活線檢測傳感器 TA459KD TA459KD

Feature

• A live wire sensor attached to the handle of a cable cutting tool (7 or 8 inches), such as a pair of pliers or nippers.
• When the live wire state is detected from the top of the covered wire, a buzzer sound and light are used to warn the workers, and to remind them not to cut the wire accidentally.
• Detectable even when gloves are used.
• Low consumption circuit that has been in operation for about 5 months with power on.
• Sensitivity adjustment volume included.

Specifications

• Size: H 23 x W 77 x D 13 mm
• Mass: about 13 g (not including battery)
• Detection voltage level: approx. 60 VAC, to 600 V (50Hz/60Hz), with 7 or 8 inch cutting tool handle installed
• Target cable: Insulation (unshielded cable)
• operation indication: intermittent sound, LED emission
• power supply: LR 44 (Alkaline Button battery) 1.5 V x 2
• battery Life: Approx. 5 months (Standby)
• Accessories: Rubber Ring M x 2, Rubber Ring S x 2, Sensitivity Adjustment Volume Cover x 2, battery, Instructions