DVI extender with PoE (PoweroverEthernet) without the need for an AC adapter on the receiver side.
It can be extended up to 70 meters at 1080p Full HD resolution and up to 100 meters at 1080p Full HD resolution.
This HDMI extender can extend DVI signals up to 100 meters at 1080p (1920 x 1080 dots) resolution.
The receiver side supports PoE (PoweroverEthernet), so you can easily install it without needing to connect an AC adapter.
DVI output is also installed on the transmitter side, allowing DVI output to the extension destination while checking the video at hand.
It consists of a set of transmitters and receivers that can be extended between units using a single Category 7/6/5e straight cable.
* 1 • Since infrared signals can also be transmitted, remote control of DVI devices can be operated from the extension destination.
The exterior structure takes into account the wall mounting function (wall mounting).
It is ideal when only the display is installed in an environment where DVI devices are difficult to install, such as a factory or a building site, and when DVI devices are installed in a remote location with a good environment.
* 1 ・・・ This product uses one Category 7/6/5e straight cable. Please purchase separately. [Note]For the LAN cable, use a 24AWG/23AWG single-wire cable. Recommended Cable Sanwa Supply KB-T7 Series (Category 7) KB-T6TS Series (Category 6) KB-T6L-CB100 (100 m)/300 (300 m) (Category 6) KB-T5T Series (Category 5e)
* 2 • Operation may not be possible due to connection equipment or functions.
Specifications
DOS/V (Windows-based) personal computer (Models with DVI (24 pin) display connectors)
Supported output devices: DVI (24 pin) capable display or projector (For Single Link Mode)
*This product supports Digital Signal chisel. Analog signals are not supported.
*DVI dual-link signals are not supported.
Interface transmitter: input: 1 female DVI (24 pin), 3.5 mm stereo mini-jack 1 output: 1 female DVI (24 pin), 3.5 mm stereo mini-jack 1, RJ -45 female 1 IE/IR unit jack 2 receiver input: 1 female RJ -45 output: 1 female DVI (24 pin), 3.5 mm stereo mini-jack 1 IE/IR unit jack 2
Resolution: 1080 p (1920 x 1080 Dots) ・・・・・ when using Category 7/6/5 e (Up to 100 m)
Supported LAN Cables: Category 7/6/5e Straight Cables
*1
Extension Cable Length: 100 m (Maximum)
Bandwidth: Single-link 165 MHz/1.65 Gbps per channel (4.95 Gbps all channel)
Power Consumption : 11.4 W (Maximum)
Case Material: Steel
Environmental Conditions Operating: 5 to 40 ° C Humidity 80% or Less (No condensation) Storage: -20 to 60 ° C Humidity 80% or Less (No condensation)
Size: Transmitter/W 140 x D 113 x H 32 mm (main unit size), Receiver/W 120 x D 73 x H 32 mm (main unit size)
Weight: Transmitter: Approx. 523 g, Receiver: Approx. 348 g
Accessory AC Adapter (48 VDC/1.05 A) x 1 power supply Cable x 1 IE Unit x 1 IR Unit x 8 Rubber Feet x 1 Instruction Manual (Guaranteed)
*1. This product uses Category 7/6 Straight cable with 1 piece. Please purchase separately.
*Use a LAN cable with a cable specification of 24 AWG/23 AWG.
*Recommended Cables Sanwa Supply KB-T7 Series (Category 7) KB-T6TS Series (Category 6) KB-T6L-CB 100 (100 m)/300 (300 m) (Category 6) KB-T5T Series (Category 5e)
*2. The product may not operate depending on the connecting device or function.