SANWA SUPPLY 藍光螢幕保護套 5.0吋　PDA-F50KBCFP PDA-F50KBCFP

Feature

• Blue light-cut LCD protective fingerprint-resistant glossy film compatible with 5.0 inch smartphones.
• This function can be used on smartphones with a 5.0 inch LCD.
• Since the adhesive surface is made of silicone material, it sticks perfectly to the LCD screen. (* Only the LCD portion is protected.). The frame is not protected. )
• It can be used as it is without cutting because it is separated by inches. (* If the size is slightly different, you need to cut it.)
• Approximately 26% cut at a blue light main wavelength of 450 nm.
• The blue light, which is difficult to absorb by the lens of the eye and can damage the retina, is cut in concentration. Recommended for eye strain.
• It reduces blue light and absorbs inside and outside of the film, making it easy on the eyes.
• Fingerprint prevention prevents fingerprints from sticking to the film.
• The glossy type makes the LCD screen crisp and vivid.
• Protects the LCD screen from dust, fingerprints, scratches, etc.
• Double-sided tape is not required.
• Touch panel compatible.

Specifications

• material: Adhesive Surface/Silicon Film, Outer Surface/PET
• Size: W 64 x D 0.2 x H 112 mm
• Quantity: 1 piece
• Reflectivity: 5%
• Transmittance: 81%
• Surface Hardness: 2 to 3H
• *The film is a blue-light cut, anti-fingerprint gloss type.
• *The above are measured values, not guaranteed values.
• How to Use
• 1.Clean the LCD screen and body. (If dust gets caught, it may cause air bubbles.)
• 2.Peel off the release film with the protruding part of the protective film. (Be careful not to get dust on it.)
• 3.Apply the protective film slowly from the corner of the LCD screen.
• *Please be careful not to press the LCD screen too hard when attaching, as it may cause damage.
• *If dust adheres to the adhesive layer of the protective film, remove it with cellophane tape. Smartphones with compatible models 5.0 inch LCD, etc.

Package size

• Package size：100×3×180 mm 20 g