John Drummond 約翰·德魯蒙德DRUMTL10電壓指示器CAT III 1000 V，CAT IV 600 V MTL10 MTL10

Feature

• Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit. Carry case, right angled probe tip, two straight tips and instructions. Drummond Test Lamps MTL10. Bright LED indication of voltage between 50V and 500V AC/DC Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems Finger shields and insulated probe tips with only 4mm of exposed metal Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant Meets the recommendations of the UK Health and Safety Executive in their guidance notes on the electrician s test lamp (GS38) Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V No batteries required

Specifications

• Quantity:1piece
• Maximum Voltage : 500V ac/dc
• Safety Category : CAT III 1000 V, CAT IV 600 V
• Display Type : LED
• IP Rating : IP67
• Power Source : Mains
• Dimensions : 213 x 112 x 72mm
• Weight : 320g
• Height : 72mm
• Length : 213mm
• Maximum Operating Temperature : +55°C
• Model Number p : DRUMTL10
• CODE No.:706-8573