Cembre 壓接模具套裝，線接頭，接線端子，導線尺寸 70 平方毫米 ME14-50 ME14-50

Feature

• Compatible with RS tube terminals typically stock no. ; 119-160 119-160. RS PRO Hydraulic Crimp Tool. RS PRO brings to you a hydraulic crimp tool, designed for industrial cable assembly applications such as car battery cables. Where conventional crimpers won ‘t do this tool meets the challenge and packs a real punch. This compact hand tool has the benefit of spring-loaded handles, a 180° rotational head and a selection of dies that can be advanced using only one hand leaving the other free to position the cable and connector. Features and Benefits. 180° rotational head Supplied with Die Sets Built-in safety valve Pressure release lever Housed in a moulded plastic carry case Comprehensive instructions included Cable Range: 6 -185 mm ;sup>2 ;/sup> Crimping Force: 50 kN Rated Operating Pressure: 600 bar (8600 psi). What do you get . RS Pro Hydraulic Crimp Tool Die Set: 6 mm², 10 mm², 16 mm², 25 mm², 35 mm², 50 mm², 70 mm², 95 mm², 120 mm², 150 mm² and 185 mm² Plastic Case. RS PRO Die Sets Available Separately. RS Stock no: ; 624-1358 624-1358 , ; 624-1308 624-1308 , ; 624-1336 624-1336 , ; 624-1320 624-1320. Typical Applications. Maintenance and repair Electrical Installations Cable assemblies FAQ: How easy are they to use Although this kit may look intimidating at first glance, it ‘s fairly simple to use. During application prepare the cable and slide on the connector, select and insert the required die, insert the cable and connector. Holding the cable in position with one hand, prime the handle until the crimp tool starts to bite, once you feel resistance you can use both hands to increase the pressure and complete the union. How do you maintain the product Movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications

• Quantity:1piece
• Crimp Connector Type : Splice, Terminal
• Wire Size : 70 mm²
• Terminal Insulation : Uninsulated
• CODE No.:441-6487