3M研磨膜254X ILF AO 2MIL TR3 254X ILF AO 2MIL TR3

Feature

• The hot-melt ST connector has a loss repeatability of 0.2 dB (1000 times) and the > hot-melt SC connector > has a loss repeatability of 0.2 dB (200 times).
• 3M ST/SC/LC Hot-Melt Fiber Optic Connector
• The hot-melt ST/SC/LC fiber optic connector is pre-sealed with adhesive in a PC polished zirconia ceramic ferrule. Can be installed in less time than standard connectors that require adhesive preparation or injection. The adhesive of this hot-melt ST/SC optical fiber connector can be reapplied, so it can be freely adjusted during assembly. Hot-melt ST/SC fiber-optic connectors are available in a polishing pack (part number; 267-8122 267-8122), and the polishing film (part number; 267-8144 267-8144), wipe with 1 cloth, and it is ready. In addition, the polishing pad (part number; 267-8138 267-8138), and an SC hot-melt connector cooling stand (part number; 267-8087 267-8087) are also available. This hot-melt fiber optic connector supports multimode 125 micron fiber cables up to 3 mm in exterior diameter. Once installed, the assembly is low loss and mechanically stable. For SC hot-melt connectors, since the body is terminated by the crimping ring of the cable, the part number; You need a crimping tool for 267-8100 267-8100.
• The hot-melt LC/ST/SC fiber connector is pre-sealed with adhesive inside a PC-polished zirconia ceramic ferrule. Can be installed in less time than standard connectors that require adhesive preparation or injection. Once installed, the assembly is low loss and mechanically stable.

Specifications

• Quantity:1bag(50pieces)
• Hot Melt ST Connectors have a loss repeatability of 0.2dB, 1000 matings,>while Hot Melt SC Connectors have >0.2dB, 200 matings. 3M ST, SC and LC Hot Melt Fibre Optic Connectors. Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly. Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number ; 267-8122 267-8122 ) and one grade of polishing film (stock number ; 267-8144 267-8144 ). A polishing pad is also available (see stock number ; 267-8138 267-8138 ) and a SC Hot Melt connector cooling stand (stock number ; 267-8087 267-8087 ) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly. The SC Hot Melt connector requires a crimp tool stock no. ; 267-8100 267-8100 to terminate the body via a crimp ring to cable.
• CODE No.:267-8144