Burkert 流量控制器，電纜插頭，PNP，12-36 V 直流 423913 423913

Feature

• This unit requires a direct 12 to 30Vdc supply. It is not compatible with output modules, such as the 4-20mA transmitter. SE30 Flow Control Pulse Transmitter Module. This flow control pulse transmitter module is designed to measure the continuous flow of liquids. The sensor produces a signal which can be transmitted and processed enabling the end user to get a flow measurement. Division is performed by measuring the pulses for the required unit of flow (litres per min.) and then, by the use of four rotary switches on the divider unit (discontinued) - that sit on top of the transmitter to divide signals enabling the output to be tailored to individual requirements. The correct dividing factor can be set up to give the required pulses out for the flow rate. If a fast flow is being monitored and the number of pulse outputs is extremely high the divider unit will bring this down to a more usable level and enable the measurement of any flow rate, regardless of PLC connected. Lower specification flow control transmitter module for use with PLCs PNP or NPN output (use either depending on the PLC type Interfaces via S030 pipework flow adaptor (see stock no. < 249-7513') 249-7513/ typically)

Specifications

• Quantity:1piece
• Electrical Connection : Cable Plug
• Control Output : PNP
• Mounting Style : Compact
• Supply Voltage : 12 36 V dc
• Pipe Diameter Range : DN 6 65 mm
• Minimum Operating Temperature : -15°C
• Maximum Operating Temperature : +60°C
• CODE No.:249-7462