Schmersal AZ/AZM 200-B30-RTAG1P1 靠右的緊急出口，適用於 AZM 200 安全開關 AZ/AZM 200-B30-RTAG1P1。 AZ/AZM 200-B30-RTAG1P1

Feature

• EN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 60947-5-1. TUV, cULus. Actuators must be ordered separately. Schmersal AZM200 Solenoid Interlock Switch. Solenoid interlocks demand accurate alignment of actuator and device, the patented AZM 200 solenoid interlock from Schmersal eliminates this problem due to newly developed sensor technology. The actuator and interlock can now have an offset of ± 5 mm and the actuator still engages the interlock. This simplifies the mounting and reduces regular maintenance and adjustment of the safety guard. As an additional installation feature, the AZM 200 has two slotted mounting holes, enabling a quick and smooth mounting on aluminium profiles or steel frames using just two screws. The slim, symmetrical design is ideally suited for installation on current profiles with a minimum width of 40 mm. Three LED's indicate the operating state. Therefore, the operator always knows whether the door is released for unlatching. This interlock offers enormous advantages particularly for fences around hazardous areas with walk-in access. Due to the one-hand operation of the emergency handle, the hazardous area can be left quickly and safely, even during a power failure. The AZM 200 increases machine availability through the integrated modern electronics. This is because intelligent diagnosis provides fast trouble-shooting. A fault does not lead to an immediate machine switch-off, the fault is first signalled so that the machine can be progressively shut down in a controlled manner. The AZM 200 can even be wired in series with other AZM 200 solenoid interlocks and also with the Schmersal safety sensor CSS 180. This feature considerably reduces the wiring costs and simplifies the set-up of safety circuits. Thermoplastic enclosure Guard locking monitored Electronic contact-free, coded system Maximum length of the sensor chain 200 m Self-monitoring series-wiring of 31 sensors 3 LEDs to show operating conditions Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally Intelligent diagnosis Manual release IP67 to IEC/EN 60529. Actuators and Lockout Tag. Stock no. ; 880-1794 880-1794 for sliding guards, left hand Stock no. ; 880-1797 880-1797 for sliding guards, right hand Stock no. ; 880-1791 880-1791 for one-hand emergency exit, left hand Stock no. ; 880-1801 880-1801 for one-hand emergency exit, right hand Stock no. ; 880-1804 880-1804 is a lockout tag

Specifications

• Quantity 1piece
• Accessory Type : Emergency Exit Right Hand
• For Use With : AZM 200 Safety Switch
• CODE No.:880-1801