The seal can be made with the film surface of the sterile bag facing up.
* * Since the heater of this product is attached to the lower side, the film surface of the sterilized bag should be set to the lower side for stronger adhesion.
* Depending on the sterilized bag used, it may not be possible to seal with the film surface set on the upper side, or the welding may become weak.
When the film surface is set to the upper side and the welding is weak: (1) Set the film surface to the lower side. Or (2) set the energization time longer.
If the film is too melted when the film surface is set to the lower side: (1) Set the film surface to the upper side. Or (2) set the energization time short.
It comes with a sliding cutter.
Specifications
Model number: MB-5 x 200
Seal width x length (mm): 5 x 200
Body size (mm): 92 x 380 x 265
Sealer accessories: Heater x 2 pieces, Fluorocarbon resin sheet x 2 sheets, Fluorocarbon resin adhesive tape x 2 sheets, Cutter blade x 1 sheet
Sealing ability: PE (polyethylene)/to 0.6mm, PP (polypropylene)/to 0.4mm (MB-5 x 200), to 0.5mm (other)
Power source: AC100V 50/60Hz
Power consumption: MB-5 x 200/540W, MB-5 x 300/660W, MB-5 x 400/880W