Sugatsune Kogyo Co., Ltd. Lapkonstay (180 018-907) EZSELANHHS

Features

• This product received the Good Design Award in 2011.
• By the function of the original mechanism "RAPCON," the opening and closing operation of the door is controlled softly and smoothly.
• The door can be opened with slight force.
• The door can be stopped at any position within the range of approximately 30° to 70°.
• In the range of approximately 0° to 20°, the door closes slowly and is safe even if you release your hand from the door.
• Since it is attached to the lower part of the cabinet top plate, there is less dead space in the height direction than conventional stays, and the stays do not get in the way when mounting shelves.
• No hinge or interlocking bar is required for mounting.
• The mounting position of the main unit can be easily adjusted to the bottom surface of the top plate and the small opening surface.
• Since the washer can be attached to the main unit with one touch, construction is easy and speedy.
• There is no need to adjust the torque due to the weight of the door, and there is no need for labor after construction.
• Various industrial equipment.
• *Open and close manually.
• *Never push down the arm of the stay before mounting.
• *Incorrect dimensions may not only prevent the door from closing properly, but may also damage the product.
• *Please do not open the door further from the fully opened position.
• *Please do not open or close the door in a hurry.
• *Do not use the product in a cabinet that houses a microwave oven that generates heat.
• *Never disassemble or modify the product.
• *When designing the housing (cabinet) and the door, be sure to observe the specified dimensions and the horizontal and vertical mounting positions of the product.
• *If the lifting power is close to the upper or lower limit of the specified range, check the movement of the actual product.
• *When using screw adhesive, use one that does not damage the resin part.

Specification

• Quantity: 1 pair
• Open/close test: 30,000 times (our standard)
• Material/Finish: Steel/ABS Resin
• Set Contents/Accessories: Mounting Washer (2 pcs.), Cross Recessed Countersunk Head Tapping Screws 3.5 x 38 (6 pcs.) for Mounting the Body, Cross Recessed Binding Tapping Screws 3.5 x 15 (4 pcs.) for Mounting the Washer
• Securities Code: 824-6800