Mitutoyo Corporation 高度規/514-108/附原廠校準證書 + 溯源報告 HS-100

Features

• This product is a set of a calibration certificate, inspection report, and tresability system chart which were calibrated by the manufacturer.
• With a base that fits gently to your hand, you can move easily on a fixed board.
• A rack mechanism is adopted for the moving part necessary for zero point alignment of this shaku. You can move and clamp this shaku quickly.
• Both the slider/fine feed clamp can be easily clamped using large screws.
• The slider has a better hold.
• It uses a large honjaku scale numeral that keeps your eyes from getting tired even if you use it for a long time.
• The tip of the screwdriver (Standard Accessory No. 905200 (for HS -100)) has a cemented carbide tip. (Scriber clamp box No. 05GZA033 for HS-100,) When measuring by attaching a test indicator or the like to the H4-20, make sure that the measurement is stable due to the mass balance before use.
• [Note]
• You will need the document address (company name and address) for your order.

Specification

• Maximum Measurement Length: 1000 mm
• Minimum Reading: 0.02 mm
• shaku fine motion upper and lower Amount : 25 mm
• Slider fine motion upper and lower Amount: 6 mm
• instrument difference : ± 0.07 mm
• overall height : 1340 mm
• Size: overall height/1340 mm
• Weight: 20 kg