Yamato Scientific Co., Ltd. 實驗室清洗機 AW83Z

Specification

• cleaning system
• ▼ Two rooms, an upper washing room and a lower washing room
• ▼ Pressurized water injection system: Up and down two directions
• ▼ Jet Nozzle Rotation: Upper Stage/Jet Nozzle Rotation, Lower Stage/Fixed Type (Jet Rack)
• Cleaning Pattern: Select from 3 cleaning patterns Option in ()
• ▼ Cleaning Pattern (1): Pre-cleaning → Washing → Rinsing → (Pure Water Rinsing)
• ▼ Washing Pattern (2): Washing → Rinsing → (Pure Water Rinsing)
• ▼ Washing pattern (3): rinse- > (pure water rinse)
• Cleaning Time Setting: Pre-cleaning/1~99 minutes Configurable, Cleaning/1~99 minutes Configurable, Rinsing/1~99 minutes Configurable
• Repeat setting
• ▼ Rinsing can be set up to 5 times by batch method.
• ▼ Pure water rinse (connected with optional pure water supply device) Rinse with 50 L of pure water, can be set up to 5 times
• ▼ Cleaning starts when the specified water amount is reached, and counting starts when the timer reaches the set temperature.
• Water Supply Temperature: Room Temperature ~60°C
• Washing Water Temperature: Water Supply Temperature ~80°C
• ▼ Prewash and wash set at the same temperature/Do not heat for rinsing (pure water rinsing)
• Liquid detergent supply system: Automatic supply by pump (supply amount can be adjusted)
• Liquid Detergent Tank Capacity: 2 L
• Amount of water used: Approx. 28 L per pre-wash, wash and rinse
• Hot water system: Heated by heater (internal: 6 kW) or connected to hot water piping system
• Supply Water Pressure: 0.1~0.3 MPa
• Container Stand: 2 Shelf Boards (Standard)
• Water supply method: The water is supplied by opening and closing the solenoid valve, and the amount of water is regulated by the float switch (with an excessive amount of water prevention device).
• Drain Method: Forced Drain with Pump
• Exterior Material: Chromium-Free Electrogalvanized Steel Plate Baked Coating
• Inner Tank Material: Stainless Steel Plate
• Pump
• ▼ Cleaning Pump: 3-Phase 200 VAC 50/60Hz 355 W/560 W
• ▼ Drain Pump: Single-Phase 200 VAC 45 W
• Shelf: 550 x 550 mm Maximum Load 245 N (25 kg)
• Accessories: Drain Hose (Inner Diameter 18 mm) 2 m x 1, Water Supply Hose (With Coupler) 2 m x 1, Dedicated Detergent (Murin Raster) 1 kg, Measuring Spoon (For 50 mL) 1, Test Tube Rack Support Base 1, Hose Clamp 1
• Inner Dimensions (Width x Depth x Height): 600 x 630 x 1080 mm
• External Dimensions (Width x Depth x Height): 860 x 770 x 1795 mm
• *Inner Dimensions are 1 Tank Type
• Power Capacity: 200 VAC 30 A Three Phase
• ▼ *Breaker capacity and installed capacity of 30 A.
• ▼ *Power plug is not included.
• ▼ *The length of the power cord is approximately 4 m outside.
• Weight: 220 kg