1.28 吋圓形觸控螢幕微控制器板搭載 RP2350 29075

Features

• RP2350 microcomputer module with 1.28 "(32.4 mm) diameter round IPS LCD display in black metal case.
• Capacitive touch panels, lithium-ion charge and discharge managers, and inertial measurement unit (IMU) sensors are integrated on board for easy integration into development and products.
• Powered by the Raspberry Pi RP2350 microcontroller chip, it features a custom-designed dual-core ARM Cortex-M33 processor and dual RISC-V core Hazard3 processors, clocking up to 150 MHz.
• It has 520 KB of SRAM and 16 MB of flash memory.
• 1.28 "Capacitive touch display with 240 x 240 resolution and 65000 colors for crisp photo viewing
• Lithium battery charge/discharge 2P connector is suitable for mobile applications.
• USB1.1 supports both host and device functions.
• Enables low-power sleep/hibernate mode.
• Recognizes USB as mass storage and allows programming by drag and drop method.
• It has an accurate clock, timer and temperature sensor.
• Acceleration is provided by the on-chip floating-point library.
• 6 GPIO pins via SH1.0 connector

Specification

• LCD Display Diameter: 32.4 mm
• display section
• ▼ panels: IPS method
• ▼ Resolution: 240 x 240 pixels
• ▼ Maximum color depth: 65,000 colors
• ▼ Controller: GC9A01A
• ▼ connection methods: SPI
• ▼ Pixel size: 0.135 x 0.135 mm
• touch panel
• ▼ capacitance type
• ▼ controller: CST816S
• ▼ connection methods: I2C
• IMU Sensor
• ▼ Sensor type: QMI8658
• Acceleration sensor
• ▼ Resolution: 16 bit
• ▼ Measuring range: ±2, ±4, ±8, ±16 g
• gyroscope
• ▼ Resolution: 16 bit
• ▼ Measuring range: ±16, ±32, ±64, ±128, ±256, ±512, ±1024, ±2048°/sec
• *Due to its construction, the edges of the circular touch screen have reduced touch sensitivity and accuracy.