RIKEN KEIKI Co., Ltd. (日本國內販售限定) 固定式氫氣警報器 (壁掛式) GP-6001GD-A80

Name: RIKEN KEIKI Co., Ltd. (Domestic Sales only in Japan) Stationary Type Hydrogen Gas Alarm (Wall Mounted type) GP-6001GD-A80
Price: 76129 TWD
Availability: InStock

商品包含多種型號及規格，請點選「立即選購規格」挑選

💡 重要通知：

因中東戰爭造成原物料波動影響，若訂單成立後進貨成本發生重大異動，我們將主動聯繫您協商處理。造成不便，敬請見諒。

付款方式

月結報帳 / 信用卡 / 銀行轉帳

運送方式

宅配快速到貨，滿 NT$ 999 元即享免運！

選購型號

商品介紹

Features

It can be used for explosion prevention control and constant monitoring of hydrogen gas in research and laboratory.
Hydrogen gas concentration is displayed by two methods, bar meter and digital.
The name of the hydrogen gas changes to three colors to indicate the detection status, so that the detection status can be visually confirmed from a distance (three colors: normal: green, 1st alarm: orange, 2nd alarm: red).
The indication alarm unit (model: GP-6001) adopts an independent unit for easy installation.
The two-stage alarm function enables the gradual management of gas alarms.
Adoption of maintenance mode function makes it possible to shut off external alarm during maintenance.
Gas detection part: Compact and lightweight, pressure-resistant explosion-proof structure (explosion-proof, etc., so it can be used in hydrogen atmosphere), dustproof and waterproof structure (protection grade: equivalent to IP 67), and can be installed in harsh environments.

Specification

Detection principle: catalytic combustion type
Target gas: Hydrogen
Type of indicating alarm part: GP-6001
Indication alarm part structure: Wall mounted type
Explosion-proof Gas Detector: Explosion-proof Pressure
Type of gas detector: GD-A80
Display text: H2
Sensor Type: HW-6211
Detection range: 0 ~ 100%%%%LEL
Alarm Setting: 1st Stage: 25%%%%LEL/2nd Stage: 50%%%%LEL
Number of detection points: 1 point
Alarm accuracy: within ±25%%%% of the alarm setting value
Alarm delay time: Within 30 seconds when a gas 1.6 times the alarm setting value is detected.
Gas alarm type: H-HH alarm
gas alarm operation
▼ Self-holding operation (automatic return after reset)
▼ 1st Stage: ALM1 Lamp Flashing or Lit (Red), Buzzer
▼ 2nd Stage: ALM2 Lamp Flashing or Lit (Red), Buzzer
▼ Contact output (1st Stage, 2nd Stage Individual, No Voltage)
failure alarm operation
▼ automatic return operation
▼ FAULT Lamp Flashing (Orange), Contents Display, Buzzer
▼ Contact output (no voltage)
Contact Specifications: Non-excitation at Normal Time/a Contact (Open at Normal Time)
Contact Capacity: 125 VAC/1 A, 30 VDC/1 A for Each Output (In the case of inductive load, install an appropriate spark killer on the load.)
Input power: AC type (100 VAC, 50/60Hz)