This rotary switch indicates the digital code in the ON/OFF state corresponding to the dial value.
Four switches are built in, and the four output jacks are set to ON/OFF status, indicating the dial position of 0-15 (0x0-0xf) with a 4-bit real code. There is no need to set bits one by one, as with a sliding-type DIP switch. There are 10 decimal type as well as 16 decimal type. *For setting digital values. It is not suitable for switching signal paths like a general rotary switch.
Features
Through Hole Pin/SMD
Clear clicks with metal springs
As thin as 3.9 mm thick, high-density mounting is possible