OMRON Corporation (FA and control equipment) E3NX-FA10 2M E3NX-FA102M

Specification

• Type: Sensor communication unit type
• I/O: 1 output
• Light source: Red 4 element light-emitting diode (emission wavelength: 625 nm)
• Power supply voltage: supplied from the connector through the sensor communication unit
• Power consumption: Normal mode: 920 mW or less (Consumption current 38 mA or less at 24 V power supply voltage), Eco function ON: 680 mW or less (Consumption current 26 mA or less at 24 V power supply voltage), Eco function LO: 800 mW or less (Consumption current 33 mA or less at 24 V power supply voltage)
• Operation mode: ON at incoming light/ON at flashing light switching type
• Control output: NPN open collector, DC30V or less, Load current: 100 mA or less (1~3 units connected)/20 mA or less (4 or more units connected), Residual voltage: 1 V or less (less than 10 mA)/2 V or less (10~100 mA), Off current: 0.1 mA or less
• Operation: Standard mode: 1 ms, High speed mode (HS): 250 μs, Fastest mode (SHS): 32 μs, Gigapower mode (GIGA): 16 ms
• Return: Standard mode: 1 ms, High speed mode (HS): 250 μs, Fastest mode (SHS): 32 μs, Giga power mode (GIGA): 16 ms
• Protection circuit: Output short circuit protection, Output reverse connection protection, Power reverse connection protection
• Indicator: Digital display: 7-segment display (Sub-digital display: green + Main digital display: white), Display direction: Normal/inverted display switchable, Indicator: OUT indicator (orange), L/D indicator (orange), ST indicator (blue), DPC indicator (green)
• Number of units that can prevent mutual interference: 10 (not available in the fastest mode)
• Functions: Auto Power Control, Dynamic Power Control, Timer, Zero Reset, Setting Reset, Eco Mode, Bank Switching, Sensor OFF Setting, Power Tuning, Output 1 Setting, Hiss Width Setting
• Sensitivity Adjustment: Smart Tuning (2 Point Tuning, Full Auto Tuning, Positioning Tuning, Maximum Sensitivity Tuning, Power Tuning, Percent Tuning (-99 to +99%%%%)) or Manual Adjustment
• Operating Ambient Illumination: Receiving Surface Illumination Incandescent Lamp: 20,000 lx or Less, Solar: 30,000 lx or Less
• Operating temperature range: 1~2 units: 0~55°C, 3~10 units: 0~50°C, 11~16 units: 0~45°C, (Do not freeze or dew condense.)
• Storage Temperature Range: ? 30~70°C (Do not freeze or dew condense.)
• Operating Humidity Range: 35~85%%%%RH (However, it should not condense.)
• Storage Humidity Range: 35~85%%%%RH (However, it should not condense.)
• Insulation Resistance: 20 MΩ or More (at 500 VDC Mega)
• Withstanding Voltage: 1000 VAC 50/60Hz 1min
• Vibration Resistance: Durability: 10~55 Hz Dual Amplitude 1.5 mm X, Y, Z 2h Each Direction
• Shock resistance: Endurance: 150 m/s**2, 3 times in each direction X, Y, Z
• Connection method: Connector cord for sensor communication unit (cord length 2 m)
• Weight: Body: Approx. 45 g, Packaged: Approx. 95 g
• Mounting method: DIN rail, mounting hardware
• Material: Case: Polycarbonate (PC), Cover: Polycarbonate (PC), Cord: Vinyl Chloride (PVC)
• Accessories: Owner's Manual