Yahata Neji 轉動滑動螺桿與PPS螺帽φ10XL15X100L RFSR1015-100 RFSR1015-100

Feature

• The resin nuts for rolling sliding screws are made of PPS as a base material, and special resin added with solid lubricants (such as fluororesin) is used to improve the sliding characteristics.
• Compared to polypropylene nylon polyacetal, this material has superior sliding, heat resistance and water absorption.
• Compared to ball screws, it is less noisy and slides more lightly with less torque than table screws.
• Compared to ball screws, it is less noisy and slides more lightly with less torque than trapezoidal screws.

Specifications

• Nominal Diameter D1 (mm): 10
• Lead (mm): 15
• Length (mm): 100
• Initial lead error ±0.21 / 300mm (Base temperature 25 °C)
• bending accuracy within 0.16mm
• Material / Finish: Screw shaft: Stainless steel SUS304, nuts: Sliding PPS resin
• Set Contents / Accessories: 1 PPS nut
• Quantity: 1
• Code number: 856 -6978
• * The position reproducibility changes due to the use of friction or maintenance of parts during maintenance.
• * If grease is used, grease in "molybdenum system" and "silicon system" cannot be used.
• * Please do not use it because the nut will interfere.
• * The sliding characteristics are based on the temperature of 25 °C. The characteristics may change depending on the temperature difference.
• * Because the nut is a PPS base material, it can be cracked or deformed by shock or excessive tightening.

Package size

• Package size：100×33×22 mm