MIGHT 電弧焊機 MT200FDP MT-200FDP MT-200FDP

Feature

• Compact DC TIG welder 100 V/200 V combined use type.
• Wide voltage function is installed (input voltage 85 V to 275 V compatible).
• Carriage Case Standard Included
• Touch Start
• Initial Crater Current Adjustment
• Up/Downslope Setting
• Pulse Function
• Short Circuit Protection
• Hand Rod Arc Welding, Hand Rod Hot Start, Hand Rod Arc Force
• Power Factor Improvement Circuit reduces input current by approximately 30% compared to conventional models.
• For welding iron, stainless steel, copper, etc.
• Combined use of 100 V/200 V input voltage for on-site welding (standard carry case attached)

Specifications

• Depth (mm): 450
• Height (mm): 275
• Utilization%: 40
• rated input (kVA) TIG DC: 1.7 / 3.4
• Rating input (kVA) Hand Weld: 3.3 / 7.0
• Current range (A) TIG DC: 5 to 110/5 200
• Current range (A): 5 to 110 (100 V) / 5 to 200 (200 V)
• Input voltage (V): 100/200
• Width (mm): 135
• Weld rod diameter (mm): 1.6 to 4.0
• rated input (kVA) (100 V / 200 V) TIG DC: 1.7 / 3.4
• Rating input (kVA)) (100 V / 200 V) Hand Weld: 3.3 / 7.0
• Current range (A) (100 V / 200 V) TIG DC: 5 to 110/5 200
• Current range (A) (100 V / 200 V) Hand weld: 5 - 110/5 to 200
• self-holding function
• rated input voltage: single phase 100 V / single phase 200 V
• rated input current 17 A / 33 A
• Rating frequency: 50/60 Hz
• rated output current range 5 to 110 (TIG) 5 to 200 (hand bar)
• Unload voltage 65 V (No prevention function)
• Rating utilization: 40%
• Content / Accessories: Carrying case, 150 A TIG torch, a torch switch 8m, a torch switch 8m, a torch switch 8m, an earth cable of 5 m, a gas hose (# 5 x 2, # 6), a cap cap (1 Sx, 1 Lx), tungsten electrode rod 1.6mm x 2, and tungsten electrode rod 1.6 1.6mm x 2 (torch cover)
• Quantity: 1
• Code number: 835 -4105