YUKO 彎曲磨石#AO180BC20.0 AO180 BC-20.0 AO180 BC-20.0 AO180

Feature

• It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
• The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.
• Deburring, polishing, and finishing the inner surfaces of general industrial equipment and components.
• Rust removal inner surface polishing of various cylinders of automobiles, railway vehicles, ships, etc.
• Rust, deburr and polish the inner surface of the 4~900 mm pipe.

Specifications

• Axis diameter (mm): 4.8
• Total length (mm): 203
• Applied Diameter (mm): 19.0 to 21.0
• abrasive grain: aluminum oxide
• Head of abrasive grain (mm): 63
• The number of revolutions varies from work to work but between approximately 300 and 1200 rpm
• The work time differs depending on the material and the purpose of the work, but the estimate is 10 to 20 seconds, and the reciprocating motion is 1 round trip every 2 seconds.
• Grinding fluid uses aqueous solution or oil
• Use tools: electric drills, drilling machines, machining, etc.
• The rotational speed is 300 to 1364 rpm for machining purposes, and reciprocating stroke (in and out) at the same time.
• Grinding fluid is used in wet water (solution type) or grinding oil.
• The rotational speed is 300 to 1528 rpm for machining purposes, and reciprocating stroke (in and out) at the same time.
• The rotational speed is 300 to 1378 rpm for machining purposes, and reciprocating stroke (in and out) at the same time.
• Material / Finish: Shaft: Zinc-plated wire, abrasive grain: silicon carbide, shaft: galvanized line, brush: nylon
• Quantity: 1
• Code Number: 827 -7082
• * Standard is available for 216 mm to 914 mm. Please contact us in case that you need a 'non-standard' product.

Package size

• Package size：89×292×29 mm 80 g