NABEYA 振動防抖安裝板 BML-P BML-P

Feature

• Vibration isolation mount for light load. It can be used from a light load of 300 g, which conventional anti-vibration mounts cannot cope with.
• Operating frequency: Horizontal 9 Hz/Vertical 10Hz Vibration isolation and vibration removal can be performed from the low area of.
• Compared to rubber/gel vibration isolators, this product uses a metal spring with a spring constant of approximately 1/10 to reduce the natural frequency.
• Surging, which is a problem with metal springs, is suppressed with viscoelastic vibration isolators.
• Vibration isolation and vibration removal in three axial directions can be performed. The vibration generated by motors is not only in the vertical direction. Vibration of horizontal and vertical components.
• As in the vertical direction, the horizontal direction also exhibits high vibration-proofing and anti-vibration capability.
• The use range scale of the load is on the outside of the case, so that you can check the appropriateness. Vibration isolation mounts can be used within the proper load range to provide vibration isolation and removal. You can visually confirm that the load is as designed.
• [Multi-Set Plate] Can handle medium load.
• It is flexible to change the loading load.
• Can handle unbalanced loads.
• [Mounting Plate Accessory] Flat Head Screw M6 x 10
• [Multi Set Plate Accessory] Bolts with Hex Head Hole M6 x 10 10 Pieces
• 2 Pieces 1 Set

Specifications

• material : [Vibration-Proof Mount] Upper/Lower Case : ABS Plastic Spacer : ABS Plastic , Spring : SWP-A Screw Part : brass vibration-proof material : Viscoelastic Material , [Mounting Plate (Special Accessories)] SUS304 , [Multi-Set Plate] A 5052
• Surface: [Multi-Set Plate] alumite
• Order No.: 980208
• No.: BML-P
• material : SUS304
• Accessory: flat countersunk screw M6 x 10