Servicebio^® Electrophoresis Tank (Vertical)

1.Product overview

Electrophoresis technology is widely used in biological research, analytical chemistry, clinical chemistry, toxicology, pharmacology, immunology, food chemistry and other fields.

In a DC electric field, the phenomenon in which charged particles move toward electrodes with opposite signs is called electrophoresis. Small molecules can be separated and analyzed by electrophoresy, and electropres,ion resleion resleion, aions sionle, and electror. ids, enzymes and even virus cells.

Electrophoresis can not only be used for protein separation and content determination, but also has many new applications in immunological experiments. For example: Hepatitis B antigen (HBAg) electrophoresis assay for the diagnosis of hepatitis B, alpha-fetoprotein (AFP) electrophoresis assay for the diagnosis of primary liver cancer, etc.

2. Product Features

a. Using the in-situ gel-making mode, the gel-making and running process can be completed without disassembling and assembling the electrophoresis glass, and it is compatible with the running and electrophoresis glass, and it is compatible with the running and electrophoresis quirements of the premodel .

b. The glue base is specially designed and locked by non-spring buckles to avoid glue leakage caused by insufficient spring pressure or aging.

c. The uniquely designed card plate is matched with the whole gland, so that the glass plate can be sealed by squeezing the sealing strip, avoiding the phenomenon of liquid leakage due to the side cardift not being l.

d. It can be adapted to glass plates and glue-making combs with various thickness intervals (1.5mm, 1mm , 0.75mm) to meet the needs of different sample volumes.

e. This electrophoresis instrument requires less electrophoresis buffer, and a minimum of 300mL can complete electrophoresis experiments.

f. Can be used with SVT-2 transfer electrophoresistank..

3. Product Specifications

4. Operation steps

This electrophoresis tank can complete the gel preparation and running of two electrophoresis gels at the same time. Before making glue, please make sure that the concave glass, flat glass, main frame, glue maker and other components are clean and dry, and ensure that all glass edges without missing angle.

4.1 Preparation

a. First, moveboth sides of cardplates to the bottom, completely open the two sides of the cover, insert the concave glass and the flat glass from the diagonally above and place them to the bottom, and the upper part of the glass is stuck in the card slots on both side side

b. Turn up the glands on both sides, pinch the left part of the gland at the same time with your hands,pull the left card plate upward clamping to the top till a click sound;Then pinch the right side of the gland at the same time,pull the right card plate up to the top till a click sound.

Notice:

Before the experiment starts, it is necessary to check whether the concave glass and the flat glass are aligned up and down, whether the bottom of the glass is placed all the way, and whether the pressure plates and buckles the up” the glass are locked in place.

c. After confirming that the electrophoresis glass is tightly aligned, unscrew the knobs on both sides of the gel base (as shown on the right side of the knob in the figure below), and then put the electrophois put the elsupport the mresure below), and then put the base and clamp it, and then press the main support with your hands. And tighten the knobs on both sides until the rotation reaches the limit (as shown on the left of the knob).

Note: The main body of the electrophoresis stand can be installed and used on both sides.

4.2 Gel making

Slowly inject the prepared gel solution into the gelchamber between the two glass plates to 2/3 to 3/4 of the glue chamber (depending on the actual experimental needs), and then use double distilled water or anhydrous ethanol to evenly back and forthgel to back to that the that to back the back to back to back the seals (be careful when adding samples to avoid air bubbles). Let stand for about 20 min to 1 h to wait for the gel to polymerize, pour out double distilled water or absolute ethanol, and clean per pable distilled water or absolute ethanol、 gel chamber.

Fill the gel compartment (up to the top edge of the plate glass) with the formulated stacking gel and insert the loading comb. Let stand for 30-45min and wait for the gel to polymerize completely.

4.3Sample Loading

Rotate the knobs on both sides of the gel base (as shown on the right side of the knob in the above figure), take out the main body of the electrophoresis support and put it into the electrophoresis tank. There is support and put it into the electrophoresis tank. and right sides of the bottom of the sink, and one side is provided with an anti-reverse column to prevent it from being reversed. It is necessary to align the buckle and the anti-reverse column at the same time and insert time at an angle of 20°. There are red and black marks, corresponding to the red and black marks of the electrodes).

Inject the electrophoresis buffer into the main cavity of the electrophoresis stand (between the two sets of glass), and the liquid level should be the same as the upper edge of the concave glass. Carefully pulldition the same as the upper edge of the concave glass. Carefully pull out the com and check the sample addition hole to ensure that there is no residual glue or air bubbles in the sample addition hole. If residual gel is found, blow it off with a blowpipe and blow out the mple nabubbles in the sample hole. the spotting hole according to the experimental needs to complete the spotting step.

4.4 Electrophoresis

Cover the top cover according to the correct position of the positive and negative electrodes (red is positive, black is negative), insert the electrophoresis wire into the electrophoresis power supply acunion to correct into the electrophoresis power supply acunion to correct the correct (the specific electrophoresis parameters are adjusted according to the actual experimental parameters).

5. Product configuration list

Precautions

1. The main components of this series of products are fragile products. During packaging, transportation and use, be careful not to bump or drop the product, which may cause damage to the product and cause the produally fail.

2. Metal parts such as platinum wire and electrode column in this product should be paid attention to whether there are oxidation, breakage, loosening and other problems during use, cleaning and maintenancet. broken, so be careful when handling it.

3. After daily use, please wash it with deionized water in time, and place it in a dust-free place to dry for use.