ICHINEN TASCO CO., LTD. 緊湊電導率計 TA412CN TA412CN

Feature

• Backlight function is standard.
• You don't need a beaker, you can measure anywhere immediately.
• Measurements can be made by simply dropping a trace reagent onto a planar sensor.
• Sensor can be replaced.
• Equipped with autostability function. (When stable, the value is automatically held, and when a change occurs, the instantaneous value is automatically displayed.)
• The battery level is also displayed.

Specifications

• Measurement principle: AC two-pole method
• Required sample volume: 0.12 ml or more
• measurement range: Electrical conductivity: 0 to 199.9 mS/cm (0 to 19.9 S/m)
• TDS Translation: 0 to 9900 ppm
• Calibration points: Maximum 3 points
• Main functions: automatic range switching, automatic recognition of standard fluid, temperature conversion function (fixed at 2% of 25 °C temperature conversion coefficient), temperature sensor adjustment function, auto-hold and auto-stability function, auto-power-off (30 minutes) battery level display, waterproof/dust-proof structure (equivalent to IP 67), sensor replaceable TDS conversion function (Factor (0.4 to 1.0), 442, NaCl, EN 27888)
• environment used: 5 to 40 °C, 85% relative humidity or less (non-condensing)
• Size: 164 x 29 x 20 mm (excluding protrusions)
• Mass: about 50 g (excluding battery)
• Accessories: Coin Type lithium battery (CR 2032) 2 pieces/Dropper 1 piece/Instruction Manual/Quick Manual/Storage Case Electrical Conductivity Standard Solution (1.41 mS/cm) 1 piece (14 mL)/Processing Solution 1 piece (14 mL)

Package size

• Package size：130×195×65 mm 290 g