EKSPLA PL2230系列雷射器

Ekspla is proud to introduce the first commercial fully diode pumped high pulse energy mode-locked laser, producing 28 ps pulses with up to 35 mJ (50 mJ preliminary) at 50 Hz pulse repetition rate. INNOVATIVE DESIGN The heart of the system is a diode pumped solid state (DPSS) master oscillator placed in a sealed monolithic block, producing high repetition rate pulse trains (88 MHz) with a low single pulse energy of several nJ. Diode pumped amplifiers are used for amplification of the pulse to 35 mJ (140 mJ preliminary) output. The high‑gain regenerative amplifier has an amplification factor in the proximity of 106. After the regenerative amplifier, the pulse is directed to a multipass power amplifier that is optimized for efficient stored energy extraction from the Nd:YAG rod, while maintaining a near Gaussian beam profile and low wavefront distortion. The output pulse energy can be adjusted in approximately 1% steps, while pulse‑to-pulse energy stability remains at less than 0.5% rms at 1064 nm. Angle-tuned KD*P and KDP crystals mounted in thermostabilised ovens are used for second, third, and fourth harmonic generation. Harmonics separators ensure the high spectral purity of each harmonic guided to different output ports. Built-in energy monitors continuously monitor output pulse energy. Data from the energy monitor can be seen on the remote keypad or on a PC monitor. The laser provides triggering pulses for the synchronisation of your equipment. The lead of the triggering pulse can be up to 500 ns and is user adjustable in ~0.25 ns steps from a personal computer. If required, up to 1000 μs lead of triggering pulse is available when a PRETRIG option is installed. Precise pulse energy control, excellent short-term and long-term stability, and a 50 Hz repetition rate makes PL2230 series lasers an excellent choice for many demanding scientific applications. SIMPLE AND CONVENIENT LASER CONTROL For customer convenience the laser can be controlled through a user‑friendly remote control pad or USB interface. The remote pad allows easy control of all parameters and features a back‑lit display that is easy to read even with laser safety eye-wear. Alternatively, the laser can be controlled from a personal computer with supplied software for a Windows™ operating system. LabView™ drivers are supplied as well. FEATURE Beam profile improvement using advanced beam shapingsystem Hermetically sealed DPSS master oscillator Diode pumped regenerative amplifier Diode pumped power amplifier producing up to 35 mJ per pulse (140 mJ preliminary) at 1064 nm Air-cooled <28 ps pulse duration Excellent pulse duration stability Up to 100 Hz repetition rate Streak camera triggering pulse with <10 ps jitter Excellent beam pointing stability Thermo stabilized second, third or fourth harmonic generator options PC control trough USB and with supplied LabView™ drivers Remote control via keypad RELATED APPLICATIONS Time resolved spectroscopy SFG/SHG spectroscopy Nonlinear spectroscopy OPG pumping Remote laser sensing Satellite ranging Other spectroscopic and nonlinear optics applications