TUNGALOY CORPORATION TAC演習 TDP37-40 TDP37-40

Feature

• Indexable Drill.
• For steel and cast iron.
• For deep hole machining.

Specifications

• Helix Angle (°): 0
• Machining Hole Depth (L)/Machining Diameter (D) ≤ 5
• Processing Diameter (φDc); mm ) : 37 to 40
• Dimensions φDs ( mm ) : 40
• Dimensions φD2 ( mm ) : 50.0
• Total length (L; mm ) : 295
• Dimensions L2 ( mm ) : 185
• Dimensions ls ( mm ) : 70
• Usable Insert: WPMT050308-D3
• Pilot Drill: DP 10 (φ 10)
• Parts Used: For Cartridge Peripheral Blade (CW05A)/For Inner Blade (CW05B)/For Tightening screw Insert (CSTB -3 S)/For Cartridge (BHM4 -10)/For Pilot Drill (SSHM5 -10)/For Oil Hole Plug screw (PT 1/4 GN)/For Spanner Insert (T -9 D)/For Cartridge (P -2.5)/For Pilot Drill (P -2.5)/For Oil Hole Plug screw (P -6)/Shim Sheet Set (SW05)
• *Diameter can be adjusted by the shim sheet set (0.5 mm steps in diameter with a maximum of 2 to 5 mm).
• *Pilot drill is built into the body, but insert is not. Please order separately.
• *When cutting steel, be sure to use water-soluble cutting oil. In addition, 10 R/min of oil and 1 MPa of oil pressure are required.
• *When using for tool rotation, use a commercially available rotary lubrication holder.
• *Drilling with overlapping workpiece materials is not recommended as it may damage the tool.
• *Not recommended for machining of low carbon steel (SS 400) or stainless steel (SUS304).
• *Machining diameter φDc is the tool diameter adjustment range.
• Pilot drill is an accessory.