SATO PARTS CO., LTD. 繼電器保險絲座 (適用於 5.2 毫米×20 毫米直徑) F-800 F-800

Feature

• Relay Type
• Dustproof/Waterproof (IP66)
• RoHS Compatible
• * Do not open the cap of the fuse holder under voltage as there is a risk of electric shock.
• * Since the contact with the fuse becomes unstable and causes abnormal heat generation and ignition, please use the clip without deformation.
• * Soldering work should be carried out so that the flux does not adhere to the inside of the clip which is the contact part with the fuse tube. If it sticks, wipe off the flux with alcohol.
• * Install the fuse tube and insert the fuse clip after soldering and the product has cooled sufficiently.
• * Cannot be used in water.
• * Depending on the operating conditions, water may enter. Please check thoroughly before use.
• * Do not use in places exposed to direct sunlight or outdoors.
• * Condensation may occur inside due to changes in ambient temperature. Remove condensation or use the product in a place where there is little change in ambient temperature.
• * Depending on the type of solvent or oil, the product may crack or dissolve.
• * When connecting the wire to the grommet, press the grommet to connect it.

Specifications

• Compatible fuse tube size: phi 5.2 x 20 mm
• RATING: 250 V -7 A (Easily touchable equipment Outside the 50 V MAX.)
• Insulation resistance: 500 VDC, 100 megohms or more
• Withstand voltage: 2000 VAC (1 minute)
• Protection rating: IP 66 (1 minute)
• Main insulation material: Polycarbonate (UL 94 V -2)
• Terminal fittings: Soldering terminals (Hand soldering conditions: trowel tip temperature 390 +/- 10 degrees C, trowel application time 5 +/- 1 second, 2 times)
• Body color: C (transparent)
• Connected wire: 0.75 mm 2 or less, finished outside diameter 1.5 mm -2.8 mm (cut the grommet to fit the outside diameter of the wire)
• RoHS: As of 2012/12/17