TAKENAKA ENGINEERING 火焰傳感器 FS-2000-W FS-2000-W

Feature

• It detects ultraviolet rays contained in the flame, so it works the moment a small flame comes out and outputs an alarm before a fire occurs.
• Since the sensor head can be changed by 4 steps (30°) in the vertical direction, any detection area can be set.
• When a flame is detected, the built-in buzzer sounds and the external output (non-voltage relay contact) can be taken out, so it can be connected to a remote disaster prevention controller.
• For fire alarm such as arson.
• For warnings in non-smoking and fire-free areas.
• This camera detects ultraviolet rays in flames with high sensitivity.
• Therefore, in addition to flames, some flames are detected directly or by reflection, and on the other hand, flames are not detected even when burning.

Specifications

• Width (mm): 120
• Depth (mm): 120
• Height (mm): 40
• Color: White
• Power supply voltage (V): DC 10 ~ 30 (no polarity)
• Body Dimension Diameter (φ): 120
• Alarm sound (dB): 80 or more (1 m from the front of the sensor) (Silencing is possible)
• Appearance: White
• Power supply voltage (V): DC 10 ~ 30 (no polarity)
• External Output: Voltage Free Relay Contact 1 c, Off Delay Operation (Approx. 2 Seconds), AC/DC 30 V, 0.3 A (Resistance Load)
• Detection system: ultraviolet detection system (detection wavelength: 185 ~ 260 mm)
• Usable Temperature Range: -10 °C ~ + 60 °C (No condensation or freezing)
• Location: Indoor (ceiling/wall mounting)
• Material/Finish: ABS Resin
• Set Contents/Accessories: Mounting Screws, Concrete Sleeve, Masking Cover, Clamp, Diffusion Panel
• Country of origin: Japan
• Securities Code: 135 -8876