TAKENAKA ENGINEERING LED感應燈 AC100V/60 W EA864C-56 EA864C-56
LED Sensor Light AC100V/60 W EA864C-56
商品包含多種型號及規格,請點選「立即選購規格」挑選
付款方式
月結報帳 / 信用卡 / 銀行轉帳
運送方式
宅配快速到貨,滿 NT$ 999 元即享免運!
選購型號
商品介紹
Feature
Chip-on-board LEDs provide consistent illumination over a wide area. The maximum brightness is 4000lm.
The light turns on at the lit contact input. In addition, it is equipped with a lighting contact output to enable multiple units to be interlocked.
Comes with AC plug cord (approx. 3.5 m). You can use it just by plugging it into an outlet.
The dimming function (with day/night detection function) can be used as a security light or a convenience light. Moreover, it is LED so it saves power.
By using the EA864C-51~55 or equipment capable of external non-voltage contact output, interlocking lighting can be performed on multiple units. Ideal for security lights in wide-area open-air parking lots.
* Only the EA864C-56 cannot be interlocked. Use EA864C-51 to -55 or a device capable of contact output when interlocking lights.
Specifications
Manufacturer: Takenaka Engineering (TAKEX)
Model Number: SL -34
power supply - AC100V (50/60 Hz)
Power Consumption: 60 W or less
Brightness: 4000 lumens
Lighting Mode: On/Flushing
Operation mode (day/night judgment): approximately 5 lx to ∞ lx (adjust by volume)
Illumination: 0% to 100% (adjusted by volume)
Dimming setting: 0% to 100% (adjust by volume)
Lit time: Lit/flushing of 100% during lit contact input
Lighting contact input: Voltage free a contact (one circuit)
Lighting contact output: Voltage free relay contact (a contact) AC/DC 30 V 0.5 A (output at lighting contact input)
Wiring System: power supply: AC Plug Type (Cord Length 3.5 m) Lighting Contact I/O: Terminal Type
Operating temperature range: -20 °C to + 40 °C (without condensation or freezing)
Location: Indoor/Outdoor
Rainproof Structure: IP 55
Size: 205.2 x 107 x 389.4 (H) mm
Weight cookies: about 2200 g
material : Light Part : Aluminum Die-Cast Main Unit : Plastic
Detection area: 93 °, 12 m
Light Source: Chip on Board LED
The illumination intensity of the dimming point lamp can be set from 0% to 100%.
Equipped with lighting contact output synchronized with lighting contact input