Amphenol FCI PCB 標頭 71922-110LF 71922-110LF

Feature

• Matches the Quickie IDC receptacle.
• Representative Product Number; See 673-7682 673-7682.
• Amphenol FCI Quickie 2.54 mm Substrate Ejector Header Connector
• The Quickie Series 2.54 mm ejector header connector meshes with the Quickie IDC receptacle connector.
• This Quickie ejector header uses a four-wall shroud to protect the pin.
• The shroud housing also includes dual polarity slots and keying for precise positioning and anti-accidental bite.
• The side latch ensures that the header is securely locked to the engaging connector and is easy to remove.
• It also enables high-density mounting with minimal space on the board.
• This Quickie Series 2.54 mm ejector header contact guarantees 100 insertions and removals with double plating.
• The housing is made of heat-resistant thermoplastic resin and supports the wave solder process.
• This Quickie Series 2.54 mm ejector header connector can be mounted in a light angle or vertical, with a choice of standard or low profile latch designs.
• Part numbers 71918-1XXXX and 71922-1XXXX have standard latches and 71600 0XXXX IDC receptacle and kerb part numbers 71918-2XXXX and 71922-2XXXX have low profile latches and kerb with 71600-1XXXX IDC receptacle Features and benefits: 4 Wall shroud protects contacts Double polarity slots and keying prevents accidental kerb The side latches make it easy to kerb and remove and ensure double plated contacts for 100 insertions and removals High temperature thermoplastic housing Product application information The Quickie 2.54 mm IDC connector is suitable for a variety of market applications.
• These markets include industrial, instrumentation, medical, consumer equipment, communications, and data.

Specifications

• Quantity:1bag(5pieces)
• Mates with Quickie IDC Receptacles, see stock number ; 673-7682 673-7682 typical. Amphenol FCI Quickie 2.54 mm PCB Ejector Header Connectors. Quickie series 2.54 mm ejector header connectors that mate with the Quickie IDC receptacle connectors. These Quickie ejector headers have four wall shrouding which provides protection the unmated pins. The shrouded housing also incorporates dual polarization slots and keying features for accurate alignment and to prevent mismating. The side latches enable the header to be locked securely to the mating connectors and allow easy ejection. The latches also minimize space on the PCB and enable high density mounting. The contacts of these Quickie series 2.54 mm ejector headers are duplex plated guarantees a performance of 100 mating cycles. The housings are made of high temperature thermoplastic and are able to withstand the wave solder process. These Quickie series 2.54 mm ejector header connectors are available as right angle or vertical mounting and with a standard or low profile latch design. Part numbers 71918-1XXXX and 71922-1XXXX have standard latches and mate with 71600-0XXXX IDC receptacles Part numbers 71918-2XXXX and 71922-2XXXX have low profile latches and mate with 71600-1XXXX IDC receptacles. Features and Benefits. Four wall shrouding for contact protection Dual polarization slots and keying to prevent mismating Side latches for easy, secure mating and ejection Duplex plating contacts guarantee a performance of 100 mating cycles High temperature thermoplastic housings. Product Application Information. These Quickie 2.54 mm IDC connectors are suitable for use in applications in a wide range of markets. These markets include industrial, instrumentation, medical markets, consumer, communications and data
• CODE No.:182-3081