Electrotherm 可程式傳輸器 熱電偶 LKM 264 LKM 264

Feature

• EMC Radiation: EN61326-1:2006, EN61326-2-3:2006 LKM264 Pt100/Pt1000 Digital Programmable Measurement Transducer The LKM264 is a digital programmable measurement transducer for resistance sensors that provides 0 to 10 V current output. The LKM 264 transducer is designed for mounting on a 35 mm top-hat rail. The PC and programming cable are used to specify the sensor type, measurement range, and circuit type. You can perform some corrections with the zero point controller. This sensor connects to a three-lead/four-lead circuit.
• Input: Pt100 Pt1000 Ni100 Ni1000 Programmable Resistor Full Measurement Range: -200 850 °C Pt100, -200 300 °C Pt1000, -60 250 °C Ni100/(TK 5000/6180), -60 200 °C Ni1000 (TK 5000/6180), 0 400, 0 2000 Resistor Connection Type: 2-/3-/4-Programmable Wire Circuit 0: Programmable Span: Programmable Measurement Current: 0.25 mA Current Consumption: Up to 10 mA Loop Voltage: 15 35 V dc, 15 26 V ac Polarity Protection Linearity Error: 0.1% FS Resolution: 14 bit Linearization Accuracy: 0.1 K Measurement Speed: 2/sec Output: 0 10 V, Other Output Voltage Usable Probe Failure: 10 V Short Circuit: 0 V Clamp Range: 0.2 2.5 mm2, Screw Clamp Temperature Factor: 0.015 K/°C, Setting Temperature Range 0 1000 °C Operating Temperature Range 100 1000 °C Installation: -200 mm DIN Rail Housing: Polycarbonate 850 x 100 x -200 mm Approximate Weight: 300 g Transducer LKM 1000 Pt100/Pt 250 Rail Assembly

Specifications

• Quantity:1piece
• EMC Emission and:EN 61326-1:2006 EN 61326-2-3:2006. LKM 264 Pt100/Pt1000 Digital Programmable Measuring Transducer. The LKM264 is a digital programmable measuring transducer for Resistance sensors with a 0 to 10 V current output. The LKM 264 transducer has been designed for installation on a 35-mm top hat rail. A PC and programming cable are used to specify sensor type, measuring range, and circuit type. Minor corrections can be carried out with the zero point controller. The sensor is connected with a 3-lead or 4-lead circuit. Input: Pt100 Pt1000 Ni100 Ni1000 resistor programmable Total measuring range: -200 to 850°C Pt100, -200 to 300°C Pt1000, -60 to 250°C Ni100/ (TK 5000/6180), -60 to 200°C Ni1000 (TK 5000/6180), 0 to 400, 0 to 2000 resistors Connection type: 2-/3-/4- wire circuit programmable Zero: programmable Span: programmable Measuring current: 0.25mA Current consumption: max.10mA Loop voltage: 15 to 35VDC, 15 to 26VAC polarity-safe Linearity error: 0.1%FS Resolution: 14 bit Linearisation accuracy: 0.1 K Measuring rate: 2/s Output: 0 to 10V other output voltages possible Probe break: 10V Short-circuit: 0V Clamping range: screw clamps 0.2 to 2.5mm² Temperature coefficient: 0.015 K/°C set temperature range, 0 to 100°C Operating temperature range: -25 to 70°C Mounting: 35mm DIN-rail Housing: Polycarbonate 75x25x53mm Weight: approx. 60g. Transducer LKM 264 Pt100 / Pt1000 Rail Assembly
• CODE No.:913-0848