Mitutoyo Corporation Tubular Inside Micrometer/137-205/with Manufacturer calibration certificate + Traceability　IMZ-1500

Feature

• This product is a set of a calibration certificate, inspection report, and tresability system chart which were calibrated by the manufacturer.
• A wide range of inner measurements can be made by combining several "rods with built-in reference rods" in one body.
• The measuring surface is available without cemented carbide tip or with cemented carbide tip.
• Pivot adjustment is required.
• A separate reference gauge is required for pivot adjustment.
• [Note]
• You will need the document address (company name and address) for your order.

Specifications

• measurement range (mm) : 50 to 1500
• Minimum Displayed Amount (mm): 0.01
• Stroke of micrometer head (mm): 13
• Rod Count: 10 pieces (13 , 25 , 50 , 50 , 100 , 200 , 200 , 200 , 300 , 300 mm)
• IP 65 Protected grade
• Level 6: Dust resistant. Protection against extraneous solids There shall be no intrusion of grade dust.
• Level 5: Protection grade against water to be protected against jets (Water jet). The spouted water from the nozzle from any direction shall not have a detrimental effect.
• Quantization error (Digimatic chisel): ± 1 count not included
• Size: Main Unit/50 to 63