Mitutoyo Corporation Dial Indicator Stand (7001-10)/With Manufacturer calibration certificate + Traceability　BSD-1X

Feature

• This product is a set of a calibration certificate, inspection report, and tresability system chart which were calibrated by the manufacturer.
• This is a convenient stand for measuring with a dial gauge attached.
• Since the parallel spring is used for the vertical slight movement, the slight movement can be made by one-touch operation.
• [Precautions]
• Vertical angle of the mounting hole with respect to the measuring table: 0.4/100 mm or less.
• When attaching a high-precision linear gauge (resolution of 0.1 μm or less) to this stand, the indicated value may be affected depending on the perpendicular angle of the mounting hole to the upper surface of the measuring stand.
• Small dial gauges (Outer frame ø31, 36) are not available.
• You will need a document address (company name and address) for your order.

Specifications

• Measurement Table: Grooving Measurement Table (φ 58)
• Flatness of reference plane (μm): 1.3
• Base Dimensions (mm): W 168 x D 110 x H 45
• fine motion Mechanism (adjustment range) : Parallel Spring (1 mm)
• Mounting Hole: φ 9.53, φ 8 with Bush