Sumitomo Electric Hard Metal®Carbide solid reamer + SumiReamer + SSR type (for H7 tolerance / blind hole)固體鉸孔器+SumiReamer + SSR型（適用於H7公差/盲孔

HANOU-61302633

以結合銳利度和切削邊強度的平衡設計，以f = 1.6毫米/轉的進給速度實現高效加工！具有優秀的切削邊質量和薄弱右旋扭曲槽，實現高效率和高精度孔加工。具有鉸孔專用塗層，可實現穩定且耐久的加工。高精度鉆孔：以優秀的切削邊質量實現良好的孔面質量，沒有微小破裂。穩定且耐久的鉸孔塗層：優質，高硬度，高強度薄膜，具有優異的耐磨性和耐熱性。穩定的孔徑：通過優化後錐形和切削整理來減少摩擦阻力以實現穩定的孔徑。平衡的設計以略帶右旋扭曲槽結合銳利度和切削邊強度，實現平穩的切屑排除。高速完成碳/合金鋼（〜0.28％），碳/熱處理鋼（0.29％〜），熱處理鋼，高硬度鋼（〜45HRC），鑄鐵和球墨鑄鐵的前導孔。 材質：硬質合金 級別：ACR40 注意：本產品符合日本標準。某些產品可能不符合您的產品規格，請在訂購之前仔細檢查規格。

Achieves high-efficiency machining with a feed rate of f = 1.6 mm / rev with a balanced design that combines sharpness and cutting edge strength! Achieves high efficiency and high precision hole drilling with excellent cutting edge quality and weak right-handed twisted flute. Stable and long-life processing is possible with the reamer exclusive coating. High-precision hole drilling: Achieves good hole surface quality with excellent cutting edge quality without minute chipping. Stable and long-life Reamer coating: High-grade, high-hardness, high-strength film with excellent wear resistance and heat resistance. Stable hole diameter: Stable hole diameter due to reduced rubbing resistance by optimizing the back taper and finishing by cutting. Smooth chip evacuation: A balanced design that combines sharpness and cutting edge strength with a slightly right-handed twisted flute.
High-speed finishing of pilot holes in carbon / alloy steel (~ 0.28%), carbon / heat-treated steel (0.29% ~), heat-treated steel, high-hardness steel (~ 45HRC), cast iron, and ductile cast iron.
Material: Carbide
Grade: ACR40
Caution

This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.