Omi Kogyo®SV reamer for steelSV鋼鑽套

HANOU-07599961

一種配備粗刀片和修修刀片（跳刀）的機構，可進行φ精度H7加工，表面粗糙度為2S或以下。尖端的外徑沒有咬刃（粗刀片具有微小的C以防止削碎），很難跟隨導向孔，因此不容易受到導向孔的位移和彎曲的影響，並且具有良好的位置精度和高直度可加工孔洞。無需使用浮動夾頭。盲孔也可以，因為它是具有右刃和15度右旋的螺旋鉸孔器。材料：硬質合金，磨料材料：鐵，FCD，不鏽鋼等，刀片形狀：螺旋形狀，柄：直柄，塗層：TIALN編碼，RoHS指令（對應10種物質）：對應，注意：此產品符合日本標準，某些產品可能不符合您的物品標準，請在訂購前仔細檢查規格。

A mechanism equipped with a rough blade and a finishing blade (jump blade) enables φ-precision H7 machining, and the surface roughness is 2S or less. There is no biting blade on the outer diameter of the tip (the rough blade has a minute C to prevent chipping), and it is difficult to follow the pilot hole, so it is not easily affected by the displacement and bending of the pilot hole, and it is highly straight with good position accuracy Holes can be machined. There is no need to use a floating chuck. A blind hole is also OK because it is a spiral reamer with a right blade and a right twist of 15 degrees.
Material: Carbide
Abrasive Materials: Iron, FCD, stainless steel, etc.
Blade Shape: Spiral
Shank: Straight shank
Coating: TIALN coding
RoHS directive (corresponding to 10 substances): Correspondence
Caution

This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.