CKD®In-line type clean filter FCS500 series Stainless steel type

HANOU-75216156

An in-line clean filter (stainless steel body) that uses a hollow fiber membrane for the filter element. A unique hollow fiber membrane element has been adopted to achieve a filtration accuracy of 0.01 μm and a removal efficiency of 99.99%. Since it is a hollow fiber membrane, its life is about 5 times longer than that of the flat membrane type. Compared to the flat membrane type with the same volume, it has a filtration area 3 to 10 times larger, and it has a large flow rate and low pressure loss. If the flow rate is the same, it can be made smaller and lighter. It is an oil-free specification. All parts are degreased and washed, and integrated production from assembly to packaging is carried out in a clean room.
As a filter for clean air supply. For supplying clean air to the ionizer. For supplying clean air during non-contact transportation such as liquid crystal boards. Suction transfer, air clean at the time of vacuum break.
* Cannot be used as an absolute filter (absolute filtration degree). Do not use it for applications where foreign matter is extremely disliked (such as direct blowing to a wafer). * Initial flow rate when the primary pressure is 0.7MPa and the pressure drop is 0.03MPa.
Mass (g): 100
Type of Thread: R
Material (Case): Stainless steel
Suitable Fluid: Compressed air, nitrogen gas (N2)
Material (Body): Stainless steel
Ambient and Flowing Fluid Temperature (℃): 5～45
Filtration (μm): 0.01 (removal efficiency 99.99%)
Material (Cushioning Element): Polypropylene + urethane
Differential pressure resistance (MPa): 0.5
Washing: Solvent degreasing cleaning
Caution

This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.